Images are for illustration only. Colours and finishes can look different on screen, and fittings shown may not be included - please check the specification before ordering.
Warmup · Heating 17 variants
StickyMat Electric underfloor Mat heating - 150W/6m²
900watts Warmup StickyMat at 6m² (150W/m²) | Output 150 W/m² and 200W/m² | Voltage 230V: 50Hz
£447.76 Inc. VAT
SPM6
Size · 6m²
Description
Description
Kitchens and bathrooms with about six square metres of open floor are the target for the Warmup StickyMat 150W in its 6m² size. Spread over that area, the mat uses 900 watts in total.
Power and wiring
Nine hundred watts is a real electrical load, so the electrician fitting it will want to check the circuit it joins. The mat runs from 230V: 50Hz and has a 3m cold tail between the heated section and the connection. The StickyMat System has two outputs, 150 W/m² and 200W/m², and this mat is the lower of the pair.
Underneath the floor finish, it adds a layer just 3mm deep. The cable inside carries advanced fluoropolymer (ETFE) insulation on both its inner and outer layers.
Specification
- Size of heated area: 6m²
- Total wattage: 900 watts (150W/m²)
- Power supply: 230V: 50Hz
- Cold tail: 3m, to the connection point
- Mat build-up: 3mm thick
- Cable insulation (inner and outer layers): advanced fluoropolymer (ETFE)
- Range: Warmup StickyMat System, SPM6
Only a qualified electrician should connect it, so arrange a visit before the new floor is laid.
Specification 5
Specification
- Product code
- SPM6
- Brand
- Warmup
- Range
- StickyMat System
- Size
- 6m²
- Width
- 500 mm
From the manufacturer 10
From the manufacturer
- Output
- 150 W/m² and 200W/m²
- Barcode
- 5034526005596
- Voltage
- 230V: 50Hz
- Weight (g)
- 2,400
- Mat thickness
- 3mm
- Box Width (mm)
- 150
- Box Height (mm)
- 520
- Box Length (mm)
- 150
- Cold tail length
- 3m
- Inner Outer Insulation
- Advanced fluoropolymer (ETFE)
Documents 8
Documents
- Price guideuk pricelistPDF
- DocumentWarmup-IM-StickyMat TMP ENPDF
- DatasheetWarmup-Tech-Sheet-E01-StickyMat-V1.1-0916PDF
- Technical drawingCAD-Section-StickyMat-on-JoistsPDF
- Technical drawingCAD-Section-StickyMat-on-SlabPDF
- DocumentELECTRIC-SECTIONS-01-STICKY-MAT-CONCRETE-SUBFLOOR-1PDF
- DocumentELECTRIC-SECTIONS-01-STICKY-MAT-CONCRETE-SUBFLOOR-VINYL-1PDF
- DocumentELECTRIC-SECTIONS-02-MATTPDF
Delivery and returns
Delivery and returns
Delivery is charged by weight band, one rate UK-wide, and is free over £500. Ordered from the maker when you pay.
Unfitted items can be returned within 28 days in the original packaging. Start a return with your order number and the address you ordered with — no account needed.
Write a review
CloseStickyMat Electric underfloor Mat heating - 150W/6m². Every review is read before it appears, good or bad, and shows as a verified purchase once it matches an order.
You will also need
These parts are needed to install it. Nothing is added to your basket automatically — you may already own them. Press + to add one with this product.
Before you fit it
All guidesFree delivery over £500
Below that, charged by weight - shown at checkout.
Specifications in the open
Flow rates, pressure, WRAS and drawings on every page.
Guarantees per maker
Each product's guarantee is printed on its page.
VAT included
The price you see is the price you pay.











